LELY SHUTTLE XY, Operator'S Manual

Page: 43 / 63

Test and Adjustment 7-1
D-H021.1011EN
innovators in agriculture
7. TEST AND ADJUSTMENT
The SHUTTLE must be tested each year to make sure the fill head moves
down to each bottle in the correct position with the level measure pins
in the bottle. If not all bottles are filled correctly, the SHUTTLE must be
calibrated.
Note:
This information is for Service Technicians.
7.1 Preparation
Special Tools
•
E-Link Manual Controller
Preparation
1. Remove the cover from the sample box.
WARNING
The content of the sample box contains poisonous substances
necessary to preserve the milk samples. There is a danger of damage
to health when:
- large quantities of the preservative are inhaled
- the preservative comes in contact with the skin
- the preservative is swallowed.
2. Open the lid of each bottle to 90°.
CAUTION
Do not use a not flat or bent sample box.
3. Install the sample box in the SHUTTLE base. The sample box can
only be installed one way.
4. Install the first rack (1).
5. Install the second rack (2).
6. Make sure the lids are open and between the racks.
Note:
The cover can only by closed if the racks are correctly installed.
WARNING
Always lock the cover when sample bottles are in the SHUTTLE.