LELY SHUTTLE XY, Operator'S Manual

Page: 32 / 63

5-4 Operating Instructions
D-H021.1011EN
innovators in agriculture
2. Remove the stop (5).
3. Install the connector piece (6) in the milk tube (4).
4. Install the connector piece in the elbow (3).
14. Select button [Close] when the milk tube is in position.
15. Make the applicable changes:
1. 'Current rack number': enter the current rack number, this is
usually rack 1.
2. 'Start position': enter the position number of the first bottle.
3. 'End position': enter the position number of the last bottle.
16. Select button [Next].
T4C adjustments
Note:
Once activated, the sampling does not have to be deactivated in the T4C
software again.
1. For a farm with T4C 1 software, do the following:
1. Select survey tab [Farm].
2. Select the applicable herd.
3. Select module tab [Milking].
4. Select button [Settings].
5. Select worksheet tab [General].
6. In the field 'All milkings', choose the correct option.
7. Select worksheet tab [Post milking].
8. In the field 'Sampling', choose the correct option.
9. Select worksheet tab [Post milking].
10. Select checkbox 'Sampling'.
11. Select button [Submit].
2. For a farm with T4C 3 software, do the following:
1. In the navigation bar, select 'Data Entry' and 'Settings'.
2. Select tab 'Milking'.
3. Select sub-tab 'General Milking'.
4. Select the cell in the row for the herd or the applicable group
in the column 'Sampling Method'.
5. Select the sampling method.
6. Select button [Save].
7. Select sub-tab 'Post Milking'.
8. Select the cell in the row for the herd or the applicable group
in the column 'Sampling (Yes/No)'.
9. Select 'Yes'.