DIAGNOSIS menue
30
E-LINK
D
6060 •
D
4060
Attention, danger of injury!
Standard diagnosis may only be performed after the
machine has been stopped: Switch off tractor engine, wait
until machine has stopped, disconnect hydraulic supply to
the machine.
Toggling between automatic and manual diagnosis: key
<
> (START/STOP).
In the Diagnosis Automatic mode all channels are automatically
triggered and tested in succession.
The following symbols are used for the actor status:
Symbol
Actor status
Actor channel is OK.
Actor channel is faulty.
Actor channel cannot be triggered.
Here: Automatic diagnosis
Valve diagnostic 1/2
Valve diagnostic 1/2
Valve diagnostic 1/2
Valve diagnostic 1/2
Automatic
Automatic
Automatic
Automatic
Val. B
Val. B
Val. B
Val. B
Val. C
Val. C
Val. C
Val. C
Val. 45
Val. 45
Val. 45
Val. 45
Fan
Fan
Fan
Fan
Tying
Tying
Tying
Tying
Val. 67
Val. 67
Val. 67
Val. 67
Val. 89
Val. 89
Val. 89
Val. 89
PU STOP
PU STOP
PU STOP
PU STOP
Because of special
properties, the actor
channel "Tying" is not
tested in the Automatic
Diagnosis.
