WWW.LEKKIE.TECH
LEKKIE DRIVE COVER HD USER GUIDE V2
Re-assembly is easy and painless. When re-assembling the motor make sure you grease all metal on
metal parts. Do not force any parts and if you are unsure, stop the assembly and contact us.
ASSEMBLY
1. Press the main drive gear into the new
bearing in the Lekkie Drive Cover HD.
Note: Grease the inner edge of the bearing.
2. Insert the clutch assembly into the drive
gear, making sure the pawls are engaging
the correct way.
Note: You can lubricate the clutch with a light
coating of a high viscosity grease used to
maintain cassette
3. Slide the remaining axle assembly in.
Note: Grease all touching surfaces to make
maintanance easy
.
4. Install paper gasket then slide the new
drive assembly in. Clean, apply Loctite
243, and install the 6 M4 drive cover bolts.
Tighten to 6Nm.
Note: Replace gasket if damaged.
