WWW.LEKKIE.TECH
LEKKIE DRIVE COVER HD USER GUIDE V2
Only required if you are installing a Bling Ring 40T
without
a spacer. You must complete the motor
modification steps or your Bling Ring 40T will hit your motor and damage the Bling Ring. This modification
will require you to file a small amount of material off your motor. If completed correctly the performance
and durablitly of the motor will not be effected. If you are not comfortable doing this you will just need to
use your the supplied spacer to clear the motor.
MOTOR MODIFICATION
1. Place the Lekkie Drive Cover HD on the
motor and trace pinion cover edge.
4. Place the Lekkie Drive Cover HD on
the motor and check the shape. Repeat
perovious steps if more material removal is
required.
2. Remove the Lekkie Drive Cover HD. Note
the scribbed in mark showing what you will
be removing.
3. Using a file, carefully remove material to
the scibbed in line making it the same shape
as the Lekkie Drive Cover HD. You may also
need to trim the paper gasket.
Note: We suggest covering the pinion and
inside of the motor so that the metal filings
do not make it into the motor.
