Leister Technologies AG
Operating Manual
Welding Machine SEAMTEK 36
Revision: A
QM
Page
6 / 62
Created
04.04.2014 TEX
Released
Modified
6
1.0
Introduction
This document describes the assembly and operation of the SEAMTEK 36 manufactured by
Leister Technologies AG of Kägiswil, Switzerland. This includes setup and installation, operating
procedures, and a description and purpose of each of the various modules available for use
with your SEAMTEK 36. A troubleshooting checklist, warranty information, and an index are
also included in this documentation. This manual is designed to ensure proper setup,
installation, and operation of the SEAMTEK 36 with a minimum of effort. Please read through
all sections of this document before using your SEAMTEK 36.
This version supersedes any previously dated version and is superseded by any later dated
version.
Leister Technologies AG believes the information in this manual to be complete and accurate,
but makes no warranty, either actual or implied, as to the completeness and accuracy of this
information, and assumes no liability for the use of this information.
This manual may be updated from time to time and without notice. The latest published
versions of all Leister Technologies AG users' manuals are available to authorized users by
contacting Leister Technologies AG.
1.1 Manual Conventions
Various text conventions are used throughout this documentation. In addition to providing
readability, these formatting styles are designed so that you will readily know references to a
particular button, for instance, from a discussion of that button's features.
These conventions are as follows:
All labels are written as they appear on the machine.
Note
: Notes like this one are used to provide supplemental information.
The following symbols and notations provide additional cautionary information:
Warning
: These messages warn against possible dangers that may occur as the result of unsafe
operating practices.
