58
Deleting the day's distance
Key lock
Profile selection
• In the
function display (33)
by rotating the
"e-Drive"
to select the
Settings
menu.
•
Press "e-Drive"
briefl y.
• Selecting "Show Duty Info" in the "Setup" menu rotating the
"e-Drive"
and pressing it briefl y .
• Rotating the
"e-Drive"
to select "Day Distance" and pressing
"e-Drive"
briefl y.
• Symbol
for hours counter is highlighted and confi rm by pressing the
"e-Drive"
.
• Day's distance is deleted.
• In the
function display (33)
rotating the
"e-Drive"
to select the symbol
"Return to working display"
.
• The GEOSTAR has ten freely defi nable profi les.
• Selecting the
symbol
in the
function display (33)
takes you to the "Select Profi le" menu. The profi les can
be selected with the keys
"Up" and "Down" (27/28)
and confi rmed by pressing the
"e-Drive"
.
• If setpoints (profi les 2–10) are changed during operation, they will not be saved in the profi le.
• Every time the machine is switched on/off , the values defi ned in the profi le will reappear.
• The currently selected profi le can be seen on the left in the status display
"Section 1" (35)
.
• If you would like to use the last set values when you switch on the machine again, you must select the BASIC
profi le.
• If the "BASIC" profi le is selected, then the "BASIC" profi le will not appear in the
"Section 1" status display (35)
,
but instead the voltage that is present on the device.
The key lock is activated or deactivated by simultaneously pressing
"Up" and
"Down" keys (27/28)
for at least
2 seconds.
Profile name
Voltage display
35
35