57
Display of day's distance
The welded distance is recorded as soon as the drive is running and more than 200 N force is displayed in the
working display (34)
.
The day's distance can be called up as follows:
• Using the
arrow keys "Up" (27)
and
"Down" (28)
to position the cursor on the speed in the
working display
(34)
.
• Holding down the
"e-Drive"
for 5 seconds.
• The values of the day's distance and the total distance are now shown in the speed display.
• Brief pressing on the
"e-Drive"
causes the speed to be shown again in the
working display (34)
.
• The
Speed function display (34)
is blocked during welding.
• The speed setting is enabled by briefl y pressing the
"e-Drive"
.
• Holding down the
"e-Drive"
for 5 seconds.
• The values of the day's distance and the total distance are now shown in the speed display.
• Brief pressing on the
"e-Drive"
causes the speed to be shown again in the
working display (34)
and the
Speed function display is blocked.
Not in welding mode
In welding mode
Display including day's distance
Hold pressed down for 5 sec.
Press briefly 1 ×
Speed blocked
Release speed
Display incl. day's distance