WARNING
Electric shock due to use under wet and severe conditions
If unit becomes wet it may cause you to receive an electric shock.
Precautions:
▶
If the product becomes humid, it must not be used!
▶
Use the product only in dry environments, for example in buildings or vehi-
cles.
▶
Protect the product against humidity.
USB
12/24 V
100-240 V
AZ209
AZ211
AZ208
1
009336_001
☞
Only use the charger delivered with the Zeno 20.
☞
Similar to a smartphone, the Zeno 20 switches on automatically
when you attach it to a power adapter. While charging, the device
cannot be switched off. To reduce the charging time, turn off GPS.
1.
Connect the AZ209 power adapter to the Zeno 20 and to an A/C
plug.
Alternatives
:
•
Connect the AZ208 car charger to the Zeno 20 and to a cigarette
lighter of a car (12V/24V DC).
•
Connect the Zeno 20 to a computer using the AZ211 data trans-
fer cable. Note: The data transfer cable has a lower charging
capability than the AC power adapter!
•
Remove the battery from the Zeno 20 and charge it with the
Desktop Charger (823055). This charger allows you to charge up
to two batteries simultaneously.
2.
The batteries start charging. The Battery LED switches on to indicate
the status of the battery.
☞
Refer to "3.3 LED Indicators on Zeno 20" for information
about the Battery LED.
4.3
Power Functions
1.
Place the Zeno 20 on a flat and stable surface or hold the device in
your hand.
2.
Ensure that either the device is connected with the AC power
adapter or the batteries are charged up.
Charge Battery Step-
by-Step
Turning the Zeno 20
On: Step-by-step
Operation
29
