4
Operation
4.1
Equipment Setup
4.1.1
Fixing the Display Foil to the Zeno 20
3
3
4
4
2
2
1
1
009802_001
a
b
☞
Ensure that the display of the Zeno 20 is free of dust and grease.
☞
The non-reflecting display foil (b) has a carrier foil (a) with the name
of the foil printed on it.
1.
Peel away the carrier foil from the display foil.
☞
Do not peel the carrier foil more than 2 cm - 3 cm away.
2.
Fix the laid open adhesive underside of the display foil at the display
border.
3.
While peeling away the carrier foil bit by bit, slowly smooth out the
display foil onto the display.
Use a microfibre cloth to smooth out potential air bubbles between
display and display foil.
☞
Do not use sharp objects!
☞
If you want to reattach the display foil, you can easily remove and fix
it again.
4.1.2
Inserting and Removing a SIM Card and SD Card
•
Keep the card dry.
•
Use it only within the specified temperature range.
•
Do not bend the card.
•
Protect the card from direct impacts.
Failure to follow these instructions could result in data loss and/or permanent
damage to the card.
Fixing the Display Foil
to the Zeno 20 Hand-
held Step-by-Step
☞
☞
24
Operation
