manualshive.com logo in svg

Leica Zeno 20 Series, User Manual

Share
Download
Leica Zeno 20 Series User Manual Download Page 28

1b

1a

2a

2b

2b

009329_001

 

☞

To open the battery compartment, follow the instructions of the pre-

vious paragraph.

1.

Insert the battery into the compartment with the contacts facing the

top, until the battery clicks into place.

2.

Reattach the compartment cover by inserting it bottom first. Close

the battery compartment until it clicks into place. The release lever

jumps back to the position “locked”.

☞

The IP67 protection is only ensured if the battery compart-

ment is attached correctly!

4.2.3

Charging the Battery

WARNING

Electric shock due to missing ground connection

If unit is not connected to ground, death or serious injury can occur.

Precautions:

▶

The power cable and power outlet must be grounded!

 

The following advice is only valid for battery charger, power adapter and car

adapter.

WARNING

Unauthorised opening of the product

Either of the following actions may cause you to receive an electric shock:

•

Touching live components

•

Using the product after incorrect attempts were made to carry out repairs

Precautions:

▶

Do not open the product!

▶

Only Leica Geosystems authorised service centres are entitled to repair

these products.

The following advice is only valid for batteries, power adapter or docking sta-

tion.

Insert the Battery:

Step-by-step

☞

☞

28

Operation

Summary of Contents for Zeno 20 Series

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands