28
Viva GNSS, Equipment
12.
Screw the radio antenna arm onto the telescopic rod.
13.
Connect the first 1.2 m antenna cable to the radio antenna.
14.
Pass the cable through the opening in the top of the backpack and down
underneath the instrument.
15.
Connect the first 1.2 m antenna cable to the radio.
16.
Connect the 1.6 m antenna cable to port ANT on the instrument.
17.
Pass the 1.6 m antenna cable through a cable brake and down through the
opening in the bottom corner of the backpack flap. Refer to "Position of
cables in the backpack".
18.
Draw the required amount of cable out of the backpack and tighten the
cable brake.
19.
Connect one end of the second 1.2 m antenna cable to the loose end of
the 1.6 m antenna cable and the other end to the GNSS antenna.
20.
Connect the 1.8 m, CS to GS cable to the CS field controller.
21.
Pass the 1.8 m, CS to GS cable through the opening in the bottom corner
of the backpack flap and up through a cable brake. Refer to "Position of
cables in the backpack".
22.
Plug it into port P1 on the instrument.
Step
Description
