Viva GNSS, Equipment
27
Equipment setup
step-by-step
Step
Description
1.
Attach the GHT62 holder to the pole. Refer to "1.6 Fixing the CS to a Holder
and Pole".
2.
Insert the SD card or CompactFlash card and the battery into the CS field
controller.
3.
Clip the CS field controller into the holder and lock it by pushing the locking
pin into the locked position.
4.
Press ON/OFF button on the CS field controller to switch on.
Proceed with step 5. for
GS10
GS15
.
5.
Screw the GNSS antenna to the top of the pole.
6.
Insert the SD card and the batteries into the instrument.
7.
Attach the radio in its housing to port P2 or P3 on the instrument.
8.
Place the instrument in the backpack with the top side facing outwards and
the instrument front panel to the top.
9.
Fasten the strap around the instrument.
10.
Push the telescopic rod through the slit in the top of the backpack. Ensure
that it is located in the sleeve inside the backpack and push it all the way
to the bottom.
11.
Adjust the height of the telescopic rod to suit.
