© Leica
TC605/TC805/TC905/L-1.1.1en
95
To use other data recorders (e.g. IBM-compatible PCs,
Handheld computers, etc.) the interfacing parameters
may need to be changed. The communication via the
RS232 interface requires a certain protocol containing
the exact command structure (for more information
refer to the handbook "Leica Instruments online" ).
Do not turn the Total Station during measurements until
data recording is finished. The current horizontal
direction is always transmitted !
Internal data recording
The measured data (OBSERV) and the fixed-point
coordinates (COORDS) are stored in the internal
memory (refer to section "Data Management"). The
internal memory can store information for a maximum
of 3000 measurements or 4000 coordinate points.
It is possible to store, for instance, 1500 field measure-
ments and simultaneously 2000 coordinate points in the
internal memory.
New data are always appended to existing data.
COORD
Coordinates
max. 4000
memory area
TC600Z22
Memory
full
eg, at
2000 coordinate
points
and
1500 field
measurements
OBSERV
Measurements
max. 3000
