© Leica
TC605/TC805/TC905/L-1.1.1en
71
Alphanumeric point numbers, like "A1" cannot be
incremented higher than "A9". Reaching "A10" the
program displays a WARNING and this point number
has to be entered manually. You can avoid this by
entering the point number "A01" at the beginning.
Individual point number (iPT)
To easily measure a point between two running points,
there is the possibility to enter an individual point
number. This point number is not incremented and
automatically be reset to the actual point number after
recording.
For point search refer to section "Data management" /
"Searching for point numbers and multiple recordings
(FIND)".
The reflector height is entered under hr:
