© Leica
TC605/TC805/TC905/L-1.1.1en
39
In order to use the software correctly and reliably, you
must follow the instructions given in the user manual.
You must also adhere to the directions given in the user
manual for the product with which you are using the
software.
Introduction
The integrated programs enhance the functionality of
the TC605/TC805/TC905/L total station.
Daily survey work is simplified by using internally
stored coordinates. This largely eliminates the risk of
entering wrong information in the field. Points with
given coordinates or measured points can be used
within the programs.
The following programs are installed in the instruments:
- Set Job and User (Set Job)
- Set Station and Orientation (Set Station)
- Free station (Free Station)
- Setting-out (Setout)
- Tie distance (Tie distance)
- Area computation (Calc Area)
- Rapid measurement and recording (Rapid Meas)
- Reference Line (Ref. Line)
Programs are generally exit using the key
.
User Programs
Point search in
programs
With option IntMem the coordinates are searched with
1. priority in the COORD area of the internal memory.
The entered point number is always searched from the
end to the start of the COORD area. With multiple
stored and identical point numbers always the last
stored number is found.
