© Leica
TC605/TC805/TC905/L-1.1.1en
55
Start display:
- select desired method (Keyb., IntMem, OnLine)
- Input of point number
- Input of reflector height (for alphanumeric point
entry see chapter "Settings" / "Entering point
number and reflector height").
The points can be determined using three different
methods:
OnLine: measurements to target points
IntMem: from coordinates read in the internal memory
Keyb:
from coordinates entered manually
It is possible to combine all three methods.
The program supports the polygonal technique, i.e. the
calculation of the tie distance between the two last
points which were measured, entered or selected.
Confirming selection.
◊
TIE DISTANCE 1
Get DATA>
Keyb.
à
Pt :
105
hr :
1.500
Input of Easting
Input of Northing
Input of Height
Continue to next point/tie distance. Point two is now set
as point one and the following measurement or the
following data entry is used for the second point and so
on.
◊
TIE DISTANCE 1
E :
15.200
N :
85.000
H :
512.500
