background image

6

Version 1.2, Revision C 

 

Important Information

1

Indicates the correct upright position of the package.

Indicates the temperature range permitted for transporting the package.

Minimum -29 °C

M50 °C

Indicates the temperature range permitted for storing the package.

M5 °C

M50 °C

Indicates the humidity range permitted for storing and transporting the 

package.

minimum 10 % r.H.

maximum 85 % r.H

Indicates the item can be recycled where correct facilities exist.

1.2 

Instrument type

All information provided in these Instructions for Use applies only to the instrument type indicated on 
the title page. A nameplate indicating the instrument serial number is attached at the back side of the 
instrument.

1.3 

Intended use

The RM CoolClamp is an electric cooling specimen holder for the universal cassettes and the paraffin-
embedded specimens in the cassettes. It is attached by the quick clamping system to the HistoCore 
rotary microtomes. Any other use is improper and therefore not permitted.

1.4 

Qualification of personnel

•  The RM CoolClamp must be operated by trained laboratory personnel only. The instrument is intended 

for professional use only.

•  All laboratory personnel designated to operate this instrument must read these Instructions for Use 

carefully and must be familiar with all technical features of the instrument before attempting to 
operate it.

Summary of Contents for RM CoolClamp



















Reviews: