background image

5

RM CoolClamp

 

Important Information

1

1. 

Important Information

1.1 

Symbols used in the text and their meanings

Warning:

If this danger is not avoided, then this may result in death or serious injury.

Tip:

Gives you tips to simplify your workflow.

Item numbers for numbering illustrations.

 

"Fig. 7 - 

1

"

Numbers in red refer to item numbers in illustrations.

Manufacturer

Order number

Serial number

Date of manufacture

Observe the Instructions for Use.

This product fulfills the requirements of the EU directives.

Symbol for labeling electrical and electronic equipment in accordance with Section 7 

of the German Electrical and Electronic Equipment Act (ElektroG). ElektroG is the law 

on the bringing into circulation, return and environmentally compatible disposal of 

electrical and electronic equipment.
The CSA test mark means that a product has been tested and fulfills the applicable 

safety and/or performance standards, including the relevant standards defined or 

administered by the American National Standards Institute (ANSI), Underwriters 

Laboratories (UL), the Canadian Standards Association (CSA), the National Sanitation 

Foundation International (NSF) and others.

The package contents are fragile and must be handled with care.

The package must be kept in a dry environment.

Maximum of 4 stacked layers

1

Summary of Contents for RM CoolClamp



















Reviews: