Leica M 240 Instructions Manual Download Page 89

Page: 89 / 133

213

Rev

iew

ENLARGING / SELECTING THE TRIMMING /

SIMULTANEOUSLY VIEWING SEVERAL REDUCED PICTURES

With this camera it is possible to open an enlarged section of an

individual picture in the monitor to study it more closely, with a free

choice of section. Conversely, you can also view up to 36 pictures

simultaneously in the monitor, e.g. to gain an overview or to find

the picture you are looking for more quickly.

Notes:

• Not all zoom levels are available for pictures with low resolution,

e.g. 1.7 MP.

• While an enlarged picture is displayed, left/right on the direction

pad are no longer available to open other pictures, instead they

are used to "navigate" within the picture (exception: see next

note).

Turning the setting dial (30) to the right enlarges a central trimmed

area. Enlargement is possible up to 1:1, i.e. until 1 pixel of the

monitor displays 1 pixel of the picture.

The four directions on the direction pad (31) can be used to select

any position for the section to be enlarged. To do this, press the

direction (several times) in which you want to shift the section.

• In addition to the enlargement, the rectangle within the frame in

the top right-hand corner of the monitor symbolizes the position

of the section displayed.

Summary of Contents for M 240






































































































































Search results

Summary of Contents for M 240

Reviews:

Related manuals for M 240

Brands by name

Popular brands

Leica M 240, Instructions Manual

Search results

Summary of Contents for M 240

Reviews:

Related manuals for M 240

Brands by name

Popular brands