Leica M 240 Instructions Manual Download Page 101

Page: 101 / 133

225

ditio
nal

tio

INSTALLING FIRMWARE UPDATES

Leica is constantly working on developing and optimizing its

products. As many functions of the camera are entirely controlled

by software, some of these improvements and extended functions

can be installed at a later date.

Leica provides firmware updates at irregular intervals for this

purpose.

Information about any resulting changes or additions to the details

in this manual can be found on our website.

To check whether your camera is running the latest firmware

version, select

Firmware

(page 5,

SETUP

section) in the menu.

You can download new firmware from our website and transfer it to

your camera:

1. Format a memory card in the camera.

2. Turn off the camera and insert the card into an SD/SDHC/

SDXC card reader – either integrated or connected to your

computer.

3. Download the firmware file from the camera page using the

“UPDATES” link.

4. Save the file m-X_xxx.upd at the top level of the card's folder

structure. X_xxx stands for the relevant version.

5. Remove the card from your card reader and insert it in the

camera. Close the bottom cover and turn the camera on.

6. Hold down the

INFO

button (32) and turn on the camera.

The update process begins. This can take up to 15 minutes.

Note:

If the battery does not have sufficient charge, the warning message

Battery low

appears. In this case, first charge the battery and

then repeat the process described above.

Summary of Contents for M 240






































































































































Search results

Summary of Contents for M 240

Reviews:

Related manuals for M 240

Brands by name

Popular brands

Leica M 240, Instructions Manual

Search results

Summary of Contents for M 240

Reviews:

Related manuals for M 240

Brands by name

Popular brands