Leica M 240 Instructions Manual Download Page 102

Page: 102 / 133

226

ces

ries

MISCELLANEOUS

SYSTEM ACCESSORIES

INTERCHANGEABLE LENSES

The Leica M system provides a basis for optimum adaptation to

fast and unobtrusive photography. The range of lenses incorporates

focal lengths from 16 to 135mm and light intensities up to 1:0.95.

R ADAPTER M

The Leica R adapter M allows almost all Leica R lenses to be used

on the Leica M/M-P, i.e. regardless of the focal length, fixed focal

length or zoom, close up limit, with which actuating cam they are

equipped (SL "ramps" / R "steps") and whether or not they have a

ROM contact strip.

It is also possible to use these lenses in conjunction with Leica

Extender R models, and with close-up accessories such as the

Leica Macro Adapter R, Leica R intermediate rings and the R BR2

automatic bellows.

This enables the camera to be used for applications that are not

normally possible for a view and range finder camera, such as

pictures with extremely short or long focal lengths, and extreme

close up shots.

(Order no. 14 642)

FILTERS

UVa filters and a universal polarization filter M are available for

current Leica M lenses fitted with standard filter thread sizes.

Note:

Leica UV/IR filters specially developed for use on the Leica M8

and M8.2 should not be used on the Leica M/M-P as they can

cause color shifts at the edges of pictures, particularly when using

wide angle lenses.

EVF2 ELECTRONIC VIEWFINDER

The EVF2 delivers almost 100% TTL reproduction of the image field

with a resolution of 1.4 megapixels. This allows easy and precise

picture composition and, at the same time, comprehensive control

of all relevant data. It is particularly useful when the lighting

conditions impair the visibility of the monitor screen and - thanks to

the pivoting eyepiece - for worm's eye view pictures.

(Order no. 18 753)

Note:

Make sure the flash shoe cover is always fitted when no

accessories are in use (such as a flash unit, an external viewfinder

or microphone). It will protect the socket 28 for a time against

water incursion.

Summary of Contents for M 240






































































































































Search results

Summary of Contents for M 240

Reviews:

Related manuals for M 240

Brands by name

Popular brands

Leica M 240, Instructions Manual

Search results

Summary of Contents for M 240

Reviews:

Related manuals for M 240

Brands by name

Popular brands