Leica M 240 Instructions Manual Download Page 96

Page: 96 / 133

220

ditio

nal

tio

Resetting picture file names

1. In the main camera menu, (see p. 154/248) select

Image

numbering

(page 4,

SETUP

section), and

2. select

Reset

in the sub-menu.

• A further sub-menu appears, showing

Reset image

numbers?

3. Select

Yes

• After confirming your selection by pressing the

INFO

(32) or

SET

(21) button, the setting menu described under 2.

appears again.

The X characters are placeholders.

FORMATTING THE MEMORY CARD

It is not normally necessary to format memory cards that have

already been used. However, if a card that has yet to be formatted

is inserted for the first time, it must be formatted.

Note:

You should get into the habit of copying all your pictures onto a

secure bulk storage medium, e.g. the hard drive on your computer,

as soon as possible. This is particularly important if the camera is

being sent for servicing along with the memory card.

Procedure

1. In the main camera menu, (see p. 154/248) select

Format SD card

(page 5,

SETUP

section), and

2. select

Format SD card?

in the sub-menu.

3. Press the

SET

(21) or

INFO

(32) button to format the memory

card.

Notes:

• If the memory card has been formatted in another device, such

as a computer, you should reformat it in the camera.

• If the memory card cannot be formatted/overwritten, you

should ask your dealer or the Leica Information Service (for

address, see p. 256) for advice.

Summary of Contents for M 240






































































































































Search results

Summary of Contents for M 240

Reviews:

Related manuals for M 240

Brands by name

Popular brands

Leica M 240, Instructions Manual

Search results

Summary of Contents for M 240

Reviews:

Related manuals for M 240

Brands by name

Popular brands