Leica M 240 Instructions Manual Download Page 21

Page: 21 / 133

145

Prep

atio

Charge level displays

In picture mode, the battery charge level is displayed in the monitor

(35) by pressing the

INFO

button (32).

Notes:

• Remove the battery if you will not be using the camera for a long

period of time.

• A maximum of 2 months after the capacity of a battery left in

the camera is exhausted (see also the last note under “Charging

the battery”, p. 143), the date and time need to be re-entered.

• As the battery capacity deteriorates or if using an older battery,

depending on the function being used warning messages and

displays may appear and functions may be restricted or blocked.

Compatible memory cards

The camera saves the pictures on an SD (secure digital), SDHC

(high capacity), or SDXC (eXtended capacity) card.

SD/SDHC/SDXC memory cards are available from various

suppliers and with diff erent capacities and read/write speeds.

Particularly those with high capacities and read/write speeds allow

data to be recorded and retrieved very quickly. The cards have a

write protection switch, which can be used to prevent unintentional

storage and deletion of pictures. This switch takes the form of a

slider on the non-beveled side of the card; in the lower position,

marked LOCK, the data on the card is protected.

Note:

Do not touch the memory card contacts.

Summary of Contents for M 240






































































































































Search results

Summary of Contents for M 240

Reviews:

Related manuals for M 240

Brands by name

Popular brands

Leica M 240, Instructions Manual

Search results

Summary of Contents for M 240

Reviews:

Related manuals for M 240

Brands by name

Popular brands