iCON robot 60/iCON builder 60, Check & Adjust
45
5.7
Servicing the Tripod
Servicing the tripod
step-by-step
The following table explains the most common settings.
Step
Description
The connections between metal and timber components must always be
firm and tight.
1.
Tighten the leg cap screws moderately, with the supplied allen key.
2.
Tighten the articulated joints on the tripod head enough to keep the tripod
legs open when lifting the tripod off the ground.
3.
Tighten the allen screws of the tripod legs.
1
2
3
TS_076
