iCON robot 60/iCON builder 60, Description of the System
21
2
Description of the System
2.1
System Components
System compo-
nents
Main components
Terms and abbrevia-
tions
The following terms and abbreviations can be found in this manual:
006280_001
CC50
CC60
iCR60
iCS60
Component
Description
iCON robot 60/iCON
builder 60 instrument
• a total station for measuring, calculating and capturing
data.
• consisting of various models with a range of accuracy
classes.
• combined with the multi-purpose CC55/CC60/CC65/CC61/
CC66 field controller to conduct remote control surveys.
Laser Guide
• The iCON robot 60 equipped with Automatic Target
Aiming. Instruments equipped with the Laser Guide
cannot be equipped with PowerSearch (PS) or Guide Light
(EGL).
• included in a special compartment in the upper telescope
section.
• emits a visible red laser beam used for visualising the line
of sight.
• used for targeting of inaccessible objects or prohibited
surfaces; positioning of objects and inspecting marks on
surfaces.
CC50/CC55/CC60/CC65
field controller
A multi-purpose field controller enabling the remote control
of the iCON robot 60/iCON builder 60 via short range Blue-
tooth.
CC61/CC66 or
CC50/CC51 with CCD3
A multi-purpose field controller enabling the remote control
of iCON robot 60 via long range Bluetooth.
Term
Description
RCS
R
emote
C
ontrol
S
urveying
EDM
E
lectronic
D
istance
M
easurement
EDM refers to the laser distancer incorporated into the instrument
which enables distance measurement.
Two measuring modes are available:
• Prism mode. This mode refers to the ability to measure
distances to prisms.
•
Reflectorless
mode. This mode refers to the ability to measure
distances without prisms.
PinPoint
PinPoint refers to the Reflectorless EDM technology which enables
an increased measuring range with a smaller laser spot size. Three
options are available: R30, R400 and R1000.
