manualshive.com logo in svg

Leica iCON builder 60, User Manual

Share
Download
Leica iCON builder 60 User Manual Download Page 31

iCON robot 60/iCON builder 60, Operation

31

4.2

Connecting to a Personal Computer

Windows Mobile Device Center (for PCs with Windows Vista or Windows 7/Windows 8 
operating system) is the synchronisation software for Windows mobile-based pocket 
PCs. Windows Mobile Device Center enables a PC and a Windows mobile-based pocket 
PC to communicate.

Install Leica USB 
drivers

Connect USB cable 
to computer for the 
first time step-by-
step

Step

Description

1.

Start the PC.

2.

Insert the Leica iCON USB card.

3.

Run the 

SetupViva&GR_USB_XX.exe

 to install the drivers necessary for 

Leica devices. Depending on the version (32bit or 64bit) of the operating 
system on your PC, you have to select between the three setup files 
following:
• Setup_iCON_iCR60_iCB60-USB_32bit.exe
• Setup_iCON_iCR60_iCB60-USB_64bit.exe
• Setup_iCON_iCR60_iCB60-USB_64bit_itanium.exe

The setup has to be run only once for all Leica iCON devices.

4.

The 

Welcome to InstallShield Wizard for Leica Viva & GR USB drivers

 

window appears.

Ensure that all Leica iCON devices are disconnected from your PC 
before you continue!

5.

Next>

.

6.

The 

Ready to Install the Program

 window appears.

7.

Install

. The drivers will be installed on your PC.

For PCs with Windows Vista or Windows 7/Windows 8 operating 
system: If not already installed, Windows Mobile Device Center will 
be installed additionally.

8.

The 

InstallShield Wizard Completed

 window appears.

9.

Check 

I have read the instructions

 and click 

Finish

 to exit the wizard.

Step

Description

1.

Start the computer.

2.

Plug the GEV223 cable into TPS instrument.

3.

Turn on the TPS instrument.

4.

Plug the GEV223 cable into the USB port of the computer. The 

Found New 

Hardware Wizard

 starts up automatically.

5.

Check 

Yes, this time only

. 

Next>

.

006312_001

3

2

4

Summary of Contents for iCON builder 60





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands