Leica GS10 User Manual Download

Page: 56 / 80

GS10/GS15, Operation

4.5

LED Indicators on GS10/GS15

LED indicators

Description

The GS10/GS15 GNSS instrument has

ight

mitting

iode indicators. They indicate

the basic instrument status.

Diagram

Description of the
LEDs

GS10

GS15

a) Bluetooth LED
b) Storage LED
c) Position LED
d) Power LEDs
e) RTK Base LED
f) RTK Rover LED

GS_092

e f

GS_091

GS_09

GS_091

e f

IF the

THEN

Bluetooth
LED

green

Bluetooth is in data mode and ready for
connecting.

purple

Bluetooth is connecting.

blue

Bluetooth has connected.

Storage LED

off

no SD card is inserted or GS10/GS15 is switched
off.

green

SD card is inserted but no raw data is being
logged.

flashing green

raw data is being logged.

flashing yellow

raw data is being logged but only 10% memory
left.

flashing red

raw data is being logged but only 5% memory
left.

red

SD card is full, no raw data is being logged.

fast flashing red

no SD card is inserted but GS10/GS15 is config-
ured to log raw data.

Position LED

off

no satellites are tracked or GS10/GS15 is
switched off.

flashing yellow

less than four satellites are tracked, a position is
not yet available.

yellow

a navigated position is available.

flashing green

a code-only position is available.

green

a fixed RTK position is available.
SmartLink is converging or has converged.

Power LED
(active

battery

)

off

battery is not connected, flat or GS10/GS15 is
switched off.

Summary of Contents for GS10

















































































Search results

Summary of Contents for GS10

Reviews:

Related manuals for GS10

Brands by name

Popular brands

Leica GS10, User Manual

Search results

Summary of Contents for GS10

Reviews:

Related manuals for GS10

Brands by name

Popular brands