Page 36 Operating Manual EM CPD300 12/18
Main Screen after start:
1 Version of the EM CPD300.
2 Status display temperature, pressure.
3 Switch to Settings (see Page 37).
4 Light on/off.
5 Process Start / Stop.
6 Stirrer on / off. Is controlled in setting panel (see Page 37).
7 Cooling temperature to keep CO
2
fluid.
8 Sets speed of CO
2
influx in pressure chamber.
Three possibilities: slow, medium, fast. To inactivate press again.
9 Sets exchange speed. Speed from 1-10. Shows opening status of the needle
valve. To inactivate press again.
10 Sets heating speed for critical point. Three possibilities: slow, medium, fast.
To inactivate press again.
11 Sets Gas out speed. Possibilities: slow, medium, fast. Slow speed can be
decreased up to 20% of its normal speed. Adjustment under Settings / advanced
slow Gas Out (see page 37).
12 Sets Time (see page 27).
11
5
Summary of Contents for EM CPD300
Page 1: ...From Eye to Insight OPERATING MANUAL EM CPD300 167180032 Version 12 18 ...
Page 30: ...Page 27 Operating Manual EM CPD300 12 18 Press Start to activate program Test ...
Page 48: ...Page 45 Operating Manual EM CPD300 12 18 After software update press back ...
Page 52: ...Page 49 Operating Manual EM CPD300 12 18 Remove poral filter with spring from the nut ...
