5. OPER ATION - MEMORY FUNCTION ON THE TOUCHSCREEN
5.11.3 Leica RFID Module
5.11.3.1 Product Description
This microscope contains the RFID module „LID Module
1.0“.
It recognizes the used filter cubes in the fluoturret.
The different filter cubes are equipped with corresponding
passive tags (Type D6.7 special).
During initialization phase of the turret, these tags are read
by the LID Module 1.0.
The tags cannot be written or modified by the LID Module
1.0.
LID Module 1.0
5.11.3.2 Specifications LID Module 1.0
Supply Voltage
5V
Dimensions
36 x 25 x 9.8 mm
RFID Protocol
ISO 15693
Transmit frequncy
13,56 MHz
Operating temperature
-5°C to +65°C
Storage temperature
-20°C to +85°C
Communication interface
I
2
C
5.11.3.3 Specifications RFID Tag D6.7 special
Modulation Scheme
Close coupling
Dimensions
D=6,7mm
TH=2,6mm
RFID Protocol
ISO 15693
Transmit frequncy
13,56 MHz
Read write type
2kbit EEProm
Operating temperature
-15°C to +65°C
Storage temperature
-25°C to +125°C
5.11.3.4 Ports
I
2
C-Port
5.11.3.5 FCC / IC Compliance
Note:
This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide rea-
sonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequen-
cy energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to
radio communications. Operation of this equipment in a res-
idential area is likely to cause harmful interference in which
case the user will be required to correct the interference at
his own expense.
!
Notice:
This device complies with Part 15 of the FCC Rules [and
with Industry Canada licence-exempt RSS standard(s)].
Operation is subject to the following two conditions:
1. this device may not cause harmful interference, and
2. this device must accept any interference received, in-
cluding interference that may cause undesired opera-
tion.
!
Notice:
Changes or modifications made to this equipment not ex-
pressly approved by Leica Microsystems CMS GmbH may
void the FCC authorization to operate this equipment.
Hereby, Leica Microsystmems CMS GmbH declares
that the radio equipment type LID Module 1.0 designa-
tion of type of radio equipment is in compliance with Di-
rective 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
www.leica-microsystems.com
65
Summary of Contents for DMi8
Page 2: ...2 COPYRIGHT CONTENTS ...
