Leica DMi8 Instructions For Use Manual Download

Page: 63 / 98

5. OPER ATION - APERTURE AND ILLUMINATED FIELD DIAPHR AGM

Leica DMi8 with motorized aperture and illuminated field
diaphragm

Both diaphragms have been set to suitable values for the
current objective and contrast method at the factory.

t 6TJOH UIF

Aperture

(aperture diaphragm) or

Field

(field

diaphragm) keys, the motorized diaphragms can be
changed at any time. The display on the Touch Screen
changes accordingly.

Note:

The old values will be overwritten by the current ones!

Note:

When using

, the aperture diaphragm is open all

the way and cannot be closed.

Setting the diaphragms via the Touch Screen

t 0OUIF5PVDI4DSFFOVTFUIF

key for basic micro-

scope settings.

t 4FMFDUUIF

Status/Illumination

menu using the

key.

t "EKVTUUIFBQFSUVSFBOEmFMEEJBQISBHNTVTJOHUIF

and

–

keys.

Summary of Contents for DMi8



































































































Search results

Summary of Contents for DMi8

Reviews:

Related manuals for DMi8

Brands by name

Popular brands

Leica DMi8, Instructions For Use Manual

Search results

Summary of Contents for DMi8

Reviews:

Related manuals for DMi8

Brands by name

Popular brands