Leica C Instructions For Use Manual Download Page 87

Page: 87 / 292

Basics

Deleting pictures

- 51 -

Deleting multiple (up to 100)/all pictures

A picture group

(→143)

is handled as 1 picture. (All the pictures in the selected picture group

are deleted)

Press the [ ] button while viewing a picture

Use to select [Delete Multi]/[Delete All], and then press

[MENU/SET]

•Items can also be selected by turning the control dial.

●

[Delete Multi]

Use the cursor buttons to select the picture and press the [DISP] button

Picture selected

•To cancel → Press the [DISP] button again.

•To execute → Press [MENU/SET].

•Pictures can also be selected with the control dial.

•You can select [All Delete Except Favorite] in [Delete All] if there are pictures that

have been set as [Favorite]

(→165)

•A confirmation screen is displayed. Select [Yes] with the cursor buttons and then

press [MENU/SET].

•The process may take time depending on the number of pictures deleted.

Summary of Contents for C





































































































































































































































































































Search results

Summary of Contents for C

Reviews:

Leica C, Instructions For Use Manual, Page: 87 / 292

Search results

Summary of Contents for C

Reviews: