Leica C Instructions For Use Manual Download Page 204

Page: 204 / 292

Playback

Using the [Playback] menu

- 168 -

•For the setting procedures of the menu.

(→52)

[Face Rec Edit]

This mode allows you to edit or delete the recognition information for pictures with

mistaken Face Recognition.

Use the cursor buttons to select [REPLACE] or [DELETE], and

then press [MENU/SET]
Use the cursor buttons to select the picture, and then press

[MENU/SET]
Use the cursor buttons to select a person, and then press

[MENU/SET]

•If [DELETE], go to step

•Persons whose Face Recognition information has not been registered cannot be

selected.

Use the cursor buttons to select the person to replace instead

of another, and then press [MENU/SET]
Use the cursor buttons to select [Yes], and then press

[MENU/SET]

●

When Face Recognition information is deleted, it cannot be restored.

●

Pictures for which all Face Recognition information has been deleted are not

categorized in Face Recognition during [Category Selection].

●

Recognition information cannot be edited in protected pictures.

Summary of Contents for C





































































































































































































































































































Search results

Summary of Contents for C

Reviews:

Leica C, Instructions For Use Manual, Page: 204 / 292

Search results

Summary of Contents for C

Reviews: