Leica C, Instructions For Use Manual, Page: 236 / 292

Wi-Fi/NFC
[Wi-Fi Setup] menu
- 200 -
For configuring the settings required for the Wi-Fi function.
[Wi-Fi Setup] cannot be changed when connected to Wi-Fi. (excluding [Network Address])
•For details on how to select the [Setup] menu settings, refer to (→52) .
Select [Wi-Fi Setup] in the [Wi-Fi] menu
Use the cursor buttons to select item, and then press
[MENU/SET]
Item Description
[Device Name]
You can change the name of
this unit.
Press the [DISP] button
Enter the desired device name
•Refer to “Entering Text” (→65) for information on how to enter
text.
•Up to 32 characters can be entered.
[NFC Operation]
Makes NFC function setting.
[ON]: The NFC function works.
[OFF]
•It is set to [ON] at the time of purchase.
[Wi-Fi Password]
To prevent incorrect operation
or use of the Wi-Fi function
by a third party and to protect
saved personal information,
it is recommended that you
protect the Wi-Fi function with
a password.
Setting a password will automatically display the password input
screen when the Wi-Fi function is used.
[Setup]:
Enter any 4-digit numbers as the password. Close the menu after
changing settings.
[Delete]:
A confirmation screen is displayed. It is executed when [Yes] is
selected.
Exit the menu after it is executed.
•For details on how to enter characters, refer to “Entering Text”
(→65) .
•Make a copy of password. If you forget the password, you can
reset it with [Reset Wi-Fi Settings] in the [Setup] menu, however
other settings will also be reset.
[Network Address]
Displays the MAC address and
IP address of this unit.
•A “MAC Address” is a unique address that is used to identify
network equipment.
•“IP address” refers to a number that identifies a computer
connected to a network such as the Internet. Usually, the
addresses for homes are automatically assigned by the
DHCP function such as a wireless access point. (Example:
192.168.0.87)
[Approved Regulations]
Displays certification note
–