Leica C Instructions For Use Manual Download Page 200

Page: 200 / 292

Playback

Using the [Playback] menu

- 164 -

•For the setting procedures of the menu.

(→52)

[Cropping]

This mode allows you to enlarge the decisive parts of still pictures (cropping), i.e. by

“cutting off” unwanted areas.

Use the cursor buttons to select a still picture, and then press

[MENU/SET]
Select the area to crop, and then press [MENU/SET]

Enlarges the

selected section

Changes the

position of the

section

•A confirmation screen is displayed. If you select [Yes], the operation is executed.

•You can also enlarge the selected section with the control dial.

●

Original Face Recognition information will not be copied when still pictures are

cropped.

●

The picture quality is reduced after cropping.

●

The following pictures cannot be cropped.

•Motion pictures

•3D still pictures

•Panorama pictures

•Still pictures on which date or other texts had already been stamped

•Still pictures recorded with the [Quality] setting [ ], [ ] or [

]

Summary of Contents for C





































































































































































































































































































Search results

Summary of Contents for C

Reviews:

Leica C, Instructions For Use Manual, Page: 200 / 292

Search results

Summary of Contents for C

Reviews: