Leica C Instructions For Use Manual Download Page 215

Page: 215 / 292

Wi-Fi/NFC

Operating the camera using a smartphone

- 179 -

●

You can register up to 20 smartphones. If the number exceeds 20, registrations will be

deleted starting from the smartphone touched first.

●

If you perform [Reset Wi-Fi Settings], smartphone registration will be deleted.

●

If the communication environment is bad, the NFC function may not be usable.

●

If there is not a response immediately, shift the position slightly.

●

Do not bump your smartphone strongly against the camera.

●

See the instructions of your NFC-compatible smartphone for more information about

smartphone operation and settings.

●

Metal objects between the camera and the smartphone may interfere with

communication. Also, any stickers, etc., near the NFC area may affect communication

performance.

●

You can still connect to the smartphone even if the camera is turned off. The camera

lens may extend when the power is turned on after making a connection. Be careful

that the movement does not cause the camera to drop.

●

The NFC function cannot be used in the following cases:

•When connected to a television, computer, or printer

•When recording motion pictures

•During motion picture playback, during slide shows, and during panorama playback

(including pauses in each case)

•While sending pictures by Wi-Fi

•While recording still pictures (during self-timer countdown)

•While editing

•When the [Airplane Mode] is [ON]

●

After “Leica C Image Shuttle” is forced to end or after the connection has been

canceled, it is necessary to hold the smartphone close to the camera again.

Taking pictures via a smartphone/tablet (remote recording)

Connect to a smartphone

(→175)

Select [ ] from “Leica C Image Shuttle”

•The recorded images are saved in the camera.

•Motion pictures can also be recorded.

•Some settings are not available.

•When the camera is in [Panorama Shot] mode or when [Scene Mode] is set to

[3D Photo Mode], recording will be in [Program AE] mode.

•The screen differs depending on the operating system.

Summary of Contents for C





































































































































































































































































































Search results

Summary of Contents for C

Reviews:

Leica C, Instructions For Use Manual, Page: 215 / 292

Search results

Summary of Contents for C

Reviews: