Before Use
1
Before Use
• Please note that the actual controls and
components, menu items, etc. of your
Digital Camera may look somewhat differ-
ent from those shown in the illustrations in
these Instructions.
• SDHC Logo is a trademark.
• Other names, company names, and prod-
uct names printed in these instructions
are trademarks or registered trademarks
of the companies concerned.
THE FOLLOWING APPLIES ONLY IN
THE U.S.A.
THE SOCKET OUTLET SHALL BE
INSTALLED NEAR THE EQUIPMENT
AND SHALL BE EASILY ACCESSIBLE.
CAUTION
Danger of explosion if battery is incor-
rectly replaced. Replace only with the
same or equivalent type recommended
by the manufacturer. Dispose of used
batteries according to the manufac-
turer’s instructions.
Warning
Risk of fire, explosion and burns. Do not
disassemble, heat above 60
Z
C (140
Q
F)
or incinerate.
Marking sign is located on bottom of the
camera.
FCC Note:
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are
designed to provide reasonable protec-
tion against harmful interference in a
residential installation. This equipment
generates, uses, and can radiate radio
frequency energy and, if not installed
and used in accordance with the
instructions, may cause harmful interfer-
ence to radio communications. How-
ever, there is no guarantee that interfer-
ence will not occur in a particular
installation. If this equipment does
cause harmful interference to radio or
television reception, which can be
determined by turning the equipment off
and on, the user is encouraged to try to
correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet
on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
FCC Caution: To assure continued
compliance, follow the
attached installation
instructions and use only
shielded interface cables
with ferrite core when
connecting to computer
or peripheral devices.
Any changes or modifications not
expressly approved by the party
responsible for compliance could void
the user’s authority to operate this
equipment.
