manualshive.com logo in svg

Leica C-Lux 2, User Manual, Page: 12 / 116

Share
Download
Leica C-Lux 2 User Manual Download Page 12

Preparation

10

Charging the Battery

The battery is not charged when the cam-
era is shipped. Charge the battery before 
use.

1

Attach the battery with attention 
to the direction of the battery.

2

Connect the charger to the 
electrical outlet.

A. Only U.S. and Japan versions

B. Other countries

• Charging starts when the [CHARGE] 

indicator 

 lights green.

• Charging is complete when the 

[CHARGE] indicator 

 turns off (after 

about 120 minutes).

• When the [CHARGE] indicator flashes, 

read P11.

3

Detach the battery after charging 
is completed.

• After charging is completed, be sure to 

disconnect the charger from the electrical 
outlet.

• The battery becomes warm after using it 

and during and after charging. The cam-
era also becomes warm during use. This 
is not a malfunction.

• The battery will be exhausted if left for a 

long period of time after being charged. 
Recharge the battery when it is exhausted.

• The battery can be charged even if it is 

not fully discharged.

• Use the dedicated charger and battery.
• Charge the battery with the charger 

indoors.

• Do not disassemble or modify the 

charger.

LEICA

LEICA

LEICA

Summary of Contents for C-Lux 2





















































































































Reviews:

No comments