Preparation
14
Setting Date/Time
(Clock Set)
w
Initial setting
The clock is not set so the following screen
appears when you turn the camera on.
: [MENU/SET] button
: Cursor buttons
: Mode dial
1
Press [MENU/SET].
2
Press
/
/
/
to select the
date and time.
: Time at the home area
: Time at the travel destination (P55)
•
/
: Select the desired item.
•
/
: Set the display order for the date
and time.
•
: Cancel without setting the clock.
3
Press [MENU/SET] to set.
• Turn the camera off after setting the clock.
Then set the mode dial to a recording
mode to turn the camera on and check
whether or not the clock setting is correct.
w
Changing the clock setting
1
Press [MENU/SET].
2
Press
/
to select [CLOCK SET].
(P57)
3
Press
and then perform steps
2
and
3
to set the clock.
4
Press [MENU/SET] to close the menu.
• You can also set the clock in the
[SETUP] menu. (P18)
• When a fully charged battery has been
inserted for more than 24 hours, the clock
setting is stored (in the camera) for at
least 3 months even if the battery is
removed. (If you insert a battery that is not
sufficiently charged, the length of time that
the clock setting is stored may become
less.) However, the clock setting is can-
celed after this length of time. In this case,
set the clock again.
• You can set the year from 2000 to 2099.
The 24-hour system is used.
• If the clock is not set, the correct date can-
not be printed when you stamp the date
on the pictures with [DATE STAMP] (P75)
or order a photo studio to print the pic-
tures. (P78)
OFF
ON
PLEASE SET THE CLOCK
CLOCK SET
MENU
M/D/Y
JAN
1
1 2007
.
.
0
0 00
:
CLOCK SET
SELECT
SET
EXIT
MENU
:
:
CANCEL
