Leica 10854 Instruction Manual Download Page 142

Page: 142 / 220

Video Mode

142

VIDEO MODE

The settings described in this chapter only apply for video

operations. They are therefore part of the video menu and must

always be accessed and configured from within video mode (see

chapter "Camera operation" in the section "Menu Control"). Any

menu items of the same name in the picture menu are entirely

independent of these.

Notes

• You can record up to 29 minutes of uninterrupted video.

• The maximum file size for the uninterrupted video recording is

96 GB. Once a recording exceeds this file size, the overrun will

be automatically stored in a new file (but cannot be longer than

29 min).

• As only part of the sensor area is used in video recordings, the

relevantly effective focal length is increased, which slightly

reduces the size of the image sections.

• Some menu items are unavailable in Video mode. The text in the

relevant line is displayed in gray to signify the existence of a

submenu.

• Unlike in picture mode, the joystick is used exclusively for

focusing (metering and saving). A coupling of exposure metering

and focusing is not done, no matter which metering method is

selected.

VIDEO MODE AND CINE MODE

Cine mode is optimized for use by cinematography professionals.

The mode is reduced to the most important points and the use of

terminology from cinematography ensure a seamless user

experience.

(Semi) automatic exposure programs (

) and the automatic

control of light sensitivity (

Auto ISO

Floating ISO

) remain disabled.

Light sensitivity is stated as an

ASA

value.

Unlike other video modes, the shutter speeds are not set as

absolutes, but as shutter angles, relative to the selected frame

rate.

In conjunction with suitable lenses. the Cine mode allows the Leica

SL2 the use of T-stops to ensure exact same exposure scenarios

independent of camera settings.

Factory setting:

Video

▸

Select

Recording Mode

in the main menu

▸

Select the desired setting

(

Video

Cine

)

Note

• The settings for light sensitivity (ISO/ASA), aperture and shutter

speeds are saved separately for Video and Cine mode.

Summary of Contents for 10854





























































































































































































































Search results

Summary of Contents for 10854

Reviews:

Related manuals for 10854

Brands by name

Popular brands

Leica 10854, Instruction Manual

Search results

Summary of Contents for 10854

Reviews:

Related manuals for 10854

Brands by name

Popular brands