manualshive.com logo in svg

Leica Geosystems RoadRunner, Technical Reference Manual, Page: 207 / 342

Share
Download
Leica Geosystems RoadRunner Technical Reference Manual Download Page 207

Managing the Road Job

RoadRunner

207

8.4

Creating a New Road Job

Description

There are two ways of creating road jobs:

Typing them in manually by using the Alignment Tool Kit (ATK) program.

OR

Converting data created in a design package.

 

Manually entered data

Data can be typed in and edited with ATK or via RoadEd. Refer to "Alignment Tool Kit" and 
"RoadEd" for information on how to enter data manually.

Converted data

The Design to Field component of LGO offers converters from several road design and CAD 
packages. Several design packages also include a built in converter to RoadRunner. As 
different design packages follow different philosophies in representation, creation and 
storage of data the conversion process differs slightly.

The LGO, LEICA Geo Office, can be found on the "System 1200 Office SW" CD.

RR12_065

Summary of Contents for RoadRunner























































































































































































































































































































































Reviews:

No comments