LEHR LP2.5 HP Rev.A 2013
31
5. Remove the bottom front cover by removing the bolts that hold the cover
to the engine using a 10mm socket. You need to swivel the engine on the
mounting clamp to have room to access these bolts.
Once the cover is free, remove it from the engine with the fuel line attached.
Note the position and routing of the fuel line for correct re-assembly.
6. Remove the fuel line from the bottom cover by holding the banjo bolt with a
16mm wrench and turning the remote connector with a 10mm deep socket
from the hex or 16mm thin wrench as shown.
Summary of Contents for LP2.5 HP
