LEHR LP2.5 HP Rev.A 2013
30
1. Remove the top cover. Remove the rubber seal along the top edge of
the bottom covers.
3. Remove the banjo bolt from the carburetor with a 16mm wrench.*
2. Remove 1 lb. propane bottle connector from end of hose. Hold the brass
connector stationary with a 14 mm wrench and unscrew the tube nut
with a 10 mm wrench.
On reassembly, do not use teflon tape or sealant.
Removing the Fuel Line
2
*
Behind the banjo bolt is a filter
and mesh screen.
Be careful not to lose these.
1 2
14 mm
10 mm
4. Remove the screws and clamps that hold the top of the two bottom covers
together, located in the inside of the top of the two covers (left and right.)
Summary of Contents for LP2.5 HP
