LEHR LP2.5 HP Rev.A 2013
52
1. Remove the check screw
1
, and then install a pressure tester.
2. Apply 16 PSI pressure to the gearcase. The pressure should remain
steady for a minimum of 10 seconds.
If pressure drops below specification, check the drive shaft, propeller
shaft oils seals for damage, and fill/drain plugs.
3. Relieve the pressure on the tester before removing from the gearcase.
Check the Gearcase for Leaks
1
1. Check the propeller blades and splines for cracks, damage, or wear.
Replace if necessary.
Checking the Propeller
1. Check the anodes for scales, grease, or oil. Clean if necessary.
Do not oil, grease, or paint the anodes, otherwise they will be ineffec
tive.
2. Replace the anodes if excessively eroded.
Checking the Anodes
5
Summary of Contents for LP2.5 HP
