26
6 Maintenance and cleaning
6.1 Service
The dosing device and slide should be inspected and cleaned from time
to time.
In particular, spreading material with a high dust content can cause the
slide unit to clog.
1
1
2
3
3
3
3
4
5
6
Remove screws
1.
1
on the right and left.
Remove the hopper
2.
2
.
Remove four screwws at the side.
3.
Remove the cover plate
4.
5
.
Undo screw
5.
6
and remove agitator
4
.
Remove nuts
6.
3
.
Dismantle the hopper platform and remove flow plates.
7.
Clean the slide unit with a broom or compressed air.
8.
For corrosive spreading material, regularly remove and clean the motor,
and fill the shaft end with grease or copper compound.
6.2 Cleaning
The hopper can be almost fully emptied by means of the residual
discharge.
Unscrew hopper.
1.
Clean spreader and hopper with a broom.
2.
Summary of Contents for VINERO
Page 29: ...29 7 Appendix 7 3 List of spare parts ...
Page 31: ...31 7 Appendix ...
