7
2 Starting up the
VINERO
®
2.1 Mounting the frame
The
VINERO
®
can be screwed on directly or an auxiliary bracket used.
Mounting holes have been provided on the back of the frame.
The recommended delivery height is approx. 0.2 m. Please refer to the
spreading charts for precise details.
The
VINERO
®
can be mounted at the front or back of the tractor. It can
be fitted to tractors, all-terrain vehicles or cultivation machines. Because
a full hopper makes the
VINERO
®
considerably heavier, the load
capacity of platform gates and other consoles is to be checked.
2.2 Electrical connection
Technical data
Operating voltage
10 to 15 volts
Fuse
25 A
Motor output
12 watts
Speed range
40 to 66 rpm
Power consumption
of gear motor
0.4 - 1 A
Operating temperature
-10 to +70 °C
Storage temperature
-30 to +70 °C
Any changes to cable or plug connections without factory approval
automatically invalidates the entire warranty. Changes to cables are
taken into account in the case of repair.
You must consult with the manufacture before carrying out any cable
modifications.
Power loss must be taken into account when extending cables. A poor
power supply may prevent you from achieving the desired speed. A poor
power supply can momentarily cause the spreader to fail completely.
Summary of Contents for VINERO
Page 29: ...29 7 Appendix 7 3 List of spare parts ...
Page 31: ...31 7 Appendix ...
