20
4 Settings and displays
4.5 Setting cycle for electronic lifting gear control (EHR)
(special equipment for headland manager)
If the spreader is equipped with the headland manager accessory, a
specific cycle can be set for opening the slide.
Press button to select the EHR cycle
between 1 and 10.
EHR cycle 4
Press toggle switch: Setting saved, next
menu item
or
press main switch: Setting saved and
machine switched off.
4.6 Adjusting the empty indicator
Depending on the requirement and spreading material, the empty
indicator can be set to respond earlier or later.
The value for the empty indicator to switch on (if the spreading material
falls below a certain fill level) can be adjusted from -50 to +50.
Note:
Depending on the spreading material or material humidity, the remainder
level may vary somewhat.
Press the button to set the respective
value.
Factory setting is 0
With
+
values, the empty indicator
responds at a higher fill level.
With
-
values, the empty indicator responds
at a lower fill level.
Setting
0
Empty ind. ON
Summary of Contents for VINERO
Page 29: ...29 7 Appendix 7 3 List of spare parts ...
Page 31: ...31 7 Appendix ...
