OMEGA
Installation Manual
Edition Dec. 2004
Omega
platform lift
page 10 of 24
•
At the bottom, use some clean paper
to protect the rope against dust!
•
Now feed the tension (upper) rope
into the upper tube.
Lubricate each ball lightly as it
goes into the tube except for the
first three; this will remove debris
from the tube before it is trapped in
the grease. Pull the rope out of the
lower end and complete the
connection of the end parts.
Note:
It is particularly important to
lubricate long lifts.
•
Feed the lower rope through the arrestor section.
•
Complete the ends of both ropes with the rope levers shown in the illustration below.
1.
tension rope
9.
plastic ring (distance)
2.
support rope
10.
plastic part
3.
sliding contact
11.
rope lever
4.
plastic part
12.
rope clamping system
5.
metal half ring
13.
plastic part
6.
rope lever
14.
plastic part
7.
secure ring
15.
rope clamp
8.
plastic cover
16.
plastic tube
