13
PUB 751-0012
Rev. C—1/12/2012
22.
See Fig. 17
. Secure tour box wiring harness by
installing cable ties (CT1014) as shown.
23.
See Fig. 18
. Place tour box back rest template
included with tour box as shown on front of tour
box.
24.
See Fig. 17
. Using a paint marker or equivalent,
mark hole locations on tour box as shown.
25. Drill (2) 1/4” holes through tour box.
26.
See Fig. 19
. Install tour box back rest (S001422)
with hardware included in tour box.
27. Install oval Lehman badge on top of tour box lid.
28. Install tour box liners with Velcro patches (included
with tour box).
29. Reinstall operator seat. Be sure tour box wiring
harness is not pinched during re-installation.
30. Reinstall passenger seat.
TOUR BOX INSTALLATION CONTINUED
Fig. 17
Fig. 18
Fig. 19
Mark hole locations
Install tour box back rest
Secure wiring harness with cable ties
