11
PUB 751-0012
Rev. C—1/12/2012
NOTES:
1. See Fig. 11. Included with tour box are (2-
blue, 2-red) Posi-lock taps for connecting to
power (be sure to read manufacturer’s in-
structions included with tour box).
2. Cover end of gray wire with heat shrink.
GRAY WIRE ON TOUR BOX BASE PLATE IS
NOT USED. One red Posi-lock tap will not
be used.
3. Use dielectric grease (included with connec-
tors) with all Posi-lock terminals.
14.
See Fig. 12
. Connect blue wire to trike brake light
wire (red wire on trike body harness) using blue
Posi-lock tap).
15.
See Fig. 12
. Connect green wire to trike running
light wire (blue wire on trike body harness) using
blue Posi-lock tap.
16.
See Fig. 13
. Connect yellow wire to tour box plate
yellow wire with red Posi-lock tap.
TOUR BOX INSTALLATION CONTINUED
Fig. 11
Fig. 12
Fig. 13
